|Products and Services:||1,923 (+1)|
|Articles and publications:||356|
|Tenders & Vacancies:||9|
Member 90 Minute Performance Tune Up
Check operation of thermostat and calibrate.
Wash or change filter; filter provided by customer, or purchased through us.
Check overall operation of air handler including:
Oil blower motor bearings.
Apply self-rinse coil cleaner to evaporator coil.
Sanitize air handler housing.
Treat and clean drain pan.
Vacuum drain line to remove any blockage and apply drain line treatment.
Check all safety devices at air handler for electric heat operation and ensure the heat is not coming on during cooling, which causes high operating cost.
Visually inspect duct work for leakage and mold.
Condenser check (outdoor unit):
Remove top of unit and vacuum leaves and other debris from inside of unit.
Wash coils thoroughly inside and out with high pressure water hose.
Check and tighten all electrical connections.
Oil motor bearings in fan motor.
Clean panels free of any weeds or devises that may cause airflow restriction.
Apply protective wax.
Check sub cooling and superheat refrigerant for correct capacity charge.
Add up to 2lbs of refrigerant if necessary.
Locate end of drain line to ensure proper drainage of system which can improve system efficiency of humidity removal by 60%.
Last but not least, check correct breaker size to prevent house fire.