11/17/2018
Is your Company in our Directory?
9 Types of Loading Dock In-Plant Lifts for your Commercial Business in Angier, North Carolina
5/15/2019
Passport Door and Dock Systems company, a division of DuraServ Corp., has been serving the Central and Eastern North Carolina commercial door and dock needs for 24 years and always keeping up with the loading dock challenges by serving its clients with its latest products.
Passport Dock and Door Company offers its latest models for its In-Plant Lifts products:
- Serco Rail Lift Model
- Serco Level Lift Model
- Serco Loadwarrior Turntable Model
- Serco Loadwarrior Air Lift Model
- Serco Scissors Dock Lift Model SDL68-5
- Serco Loadwarrior Tilter Model
- Serco Loadwarrior Air Tilter
- Serco Loadwarrior Scissor Table Model
- Serco Loadwarrior Double Scissors Table Model
Serco Rail Lift Model
General Specifications:
- Surface-mounted Applications: Low Profile
- I-beam Deck Understructure: Heavy-Duty Type
- Cylinders(Direct Thrust): Constant Speed
- Controller: NEMA 4X Push-Button /15’ Cord
- Speed-to-Horsepower Ratio: Superior
- Power Unit/Control Panel: Self Contained
- Pre-wired Control Panel: Standard Type
- Control Circuit: 24-Volt (Fused)
- Platform: Three-Sided (3)
- Cylinder: Displacement Style
- End-load Stability: Excellent
- Checker Plate / Smooth Deck Surface and Bearing Rollers (Sealed Guide)
Serco Level Lift Model
Designed with lifting capabilities strength: 20,000 lbs.( (10/12 ft. long units); 12,000 lbs. (8 ft. long units); 50,000 lbs. Leveler (per ANSI MH14.1-1987).NEMA fully-featured 12 Control Panel and NEMA 4X (Remote/Pendant hand Control).
General Specifications:
- HP Independent Lift Motor & Hydraulic System (Remote-7.5)
- LED Light Communication Package
- One HP Independent Leveler Motor & Hydraulic System
- Safety Velocity Fuse (Leveler/Lift)
- Audible Alarm(Indicate Dock Lift: Not In Stored position)
- Protective Roller Curtain: Front
- Lip Standard: 18″
- Warning Light (Interior)
- Guard Rail Package
- PLC Operation
- Weatherseal: Side/ Rear
- Grease Fittings
Serco Loadwarrior Turntable Model
General Specifications:
- Availability: Manual/Powered Models
- Mountable: Scissors Lift/ Stable Bench/Ground-Mounting / Other Surfaces
- Base Frame (Rigid)/ Predrilled Mounting Holes
- Steel Platform(Rounded Corners): 1/2″ thick
- TGP Hard-Chromed Kingpin
- With Rollers (Sealed Ball Bearings)
- Turntable Size: 34″ x 34″ (Minimum)
- Pin Bushings(Roller)
Serco Loadwarrior Air Lift Model
General Specifications:
- Portable Design (Non-Lag down)
- Pallet Jack Pockets(Built- In)
- Operating Angle: Horizontal- 30 degrees
- Relief Valve (Over-Pressured)
- Hand/Foot Valve Control with 6′ Hose
- ANSI MH29.2 Standard(Industrial Scissor Lift)
- Flow Control (Downspeed)
- Gibs: Removable
- Airbag: Heavy-Duty
- "Shop Air”: 80 psi
For Technical Specifications, please click at
Serco Scissors Dock Lift Model SDL68-5
General Specifications:
Accommodates Truck Styles:
- Step Vans(20″)/ Pick-up Trucks/High Cube Vans/Standard Semi-Vehicles/ Bed Vehicles(60″ High Stake)
- Tubing Handrails: Removable/ Mandrel-Formed
- Bridge Plate: Standard /Split Type (18″)
- Availability: Pit/Surface-Mounted
- Hydraulic Lifting Cylinders (Dual)
- Safety Strut- Maintenance
- Travel Limit Switch(Upper)
- With Safety Chains
- Capacities Availability: 4,000-20,000 lbs.
For Technical Specifications, please click at
https://s3.amazonaws.com/duraservproducts/dock-and-in-plant-lifts/serco-scissors-dock-lift-model-sdl68-5/product132/sps-lddl-0311.pdf
Serco Loadwarrior Tilter Model
General Specifications:
- Phase availability: 1 1/2 hp 3 Phase or 3/4 hp One-Phase
- Power unit (Pre-wired/Internally-Mounted)
- Hydraulic Hoses (Double Wired/Braided)
- With Polyethylene Reservoir (Transparent)
- Approval: ANSI MH29.2 (Standard for Industrial Tilters)
- Maintenance Locks (Built-In Frame)
- Platform Size: 28″ W x 38″ L (Minimum)
- With Composite Bearings/High Lip: Standard 12′
Serco Loadwarrior Air Tilter
Designed with a heavy-duty and reinforced airbag, has fork pockets advantaged mobility and equipped with air damper that can lessen platform bouncing.For Brochure Reference, please click at
Serco Loadwarrior Scissor Table Model
General Specifications:
- Equipped Legs (Solid Steel with Stiffener Bars)
- Cylinders (High-Pressured)-with Safety Velocity Fuses
- Roller Pins with Snap Rings: Strong
- Approval: ANSI MH29.2 (Standard for Industrial Tilters)
- Tank (Polyethylene): Transparent
- NEMA-rated Controls (Pre-wired)
- Control Components: UL-approved
- Steel Rollers (Hardened)/ Axle Pins (Steel-Polished)
Serco Loadwarrior Double Scissors Table Model
General Specifications:
- Power Unit (Pre-Wired/Mounted(Internally)-5hp)
- Axle Pins: Turned, Ground/ Polished/Hard-Chromed
- Approval: ANSI MH29.1 (Stand.Industrial Scissor Lifts)
- Control Components: UL-approved
- Composite Bearings: Self-Lubricating
- Legs (Steel) with Stiffener Bars
- Hydraulic Hoses: Double-Wired/Braided
- Polyethylene Reservoir: Transparent
- Maintenance Locks: Built Into Base Frame
- Velocity Fuse: All Cylinders
Call now Passport Dock and Door Company at Angier: (919) 639-0334 or Farmville: (252) 753-6100, and for your loading dock in-plant lifts inquiries, our service technicians at their service offices at in-plant lifts North Carolina, in-plant lifts Angier NC, in-plant lifts Farmville NC would be happy to serve you.
Passport Dock and Door Company also offers dock levelers and lifts, dock seals and shelters, safety equipment and truck restraints, commercial door products, aftermarket products, industrial fans, and other docking needs.
You can also make a service request or facility evaluation at https://www.passportdockanddoor.com/service-request/ or visit personally our service offices at North Carolina, Angier NC & Farmville NC.
For other details and information, you can click at our website at https://www.passportdockanddoor.com/.
Other articles and publications:
People in the entrepreneurial side are getting more amazed and convinced of the loading-dock doors’ advancement through time. It comes in a variety of classifications, brands, and descriptions.
Enhancement of your loading dock equipment is necessary for evaluating the capacity and operation needs in this docking industry. Thus, in order to promote further safety and accessibility.
8/19/2019
To get the best loading dock leveler that is both long-lasting and efficient, choose the Serco Hydraulic Edge-of-Dock Leveler. An ideal choice for your commercial warehouse, quick and easy to use.
3/20/2020
The services of a high-end loading dock leveler are vital to the regular operation of the warehouse facilities. But it is also significant to ensure the safety of the facilities.
10/17/2019
Every day, facility managers are faced with loading dock accident. Check out Passport Door and Dock System’s ways to achieve accident-free, zero-damaged products, and superb-productivity rates.
6/9/2020
The Serco Air Powered Dock Leveler combines advanced air lifting technology with simple operations and a clean, efficient design to deliver maximum operational efficiency and low cost of ownership.
9/18/2019
Articles and publications of other companies:
Loading dock levelers should be of high quality standards, a toughness that can withstand large volumes and heavy weighted products with special features of what makes it unique and exceptional.
4/4/2019
Although there are different types of loading docks, all have the same purpose, to improve efficiency of moving in and out of materials through a facility.
10/19/2018
Southern Dock Products, a division of DuraServ, the One-Stop-Shop garage door company in Dallas TX for your commercial door and loading dock equipment needs is your number one choice in Dallas, Texas.
5/14/2020
Choose a loading dock company that blends safety, efficiency, and expertise together for your loading dock needs.
10/23/2018
Here are some dock seals that are suitable for your businesses offered by Overhead Door Company of South Florida: Serco S2000 Ultra Seal with head curtain.
3/6/2019
Secure the safety of your products and speed of dock loading and unloading by choosing the best dock leveler machine for your business from Overhead Door Company of South Florida.
12/7/2018
Business details
- +1 (919) 639-0334
- 45 Fish Drive Angier NC, 2750
- www.passportdockanddoor.com/
Passport Door & Dock Systems the largest distributor and installer of Serco Loading Dock System in North Carolina and Wayne Dalton, Rytec and Hybrid Commercial Doors.
Florida
company, product and service directory
company, product and service directory
Business Network 2008-2024
All rights reserved
All rights reserved