10/23/2018
Is your Company in our Directory?
9 Kinds of Serco Loading Dock Lifts for Your Warehouse or Industrial Dock System in Miami, Florida
9/24/2019
If you’re searching for a materials handling solution for your warehouse loading dock, Overhead Door Company of South Florida, a Division of DuraServ. is the best destination. We pride ourselves on offering a high-quality range of loading dock equipment in Miami, Florida, including convenient loading dock lifts Miami, FL that is ideal for raising and lowering items. Our loading dock lifts in West Palm, Broward, Dade, and Monroe Counties include a range of innovative features.
The loading dock lift is mainly used for large quantity loading, unloading, and handling of goods in factories, warehouses, stockyards, stations, wharves, and grain warehouses. It can be used with forklift and truck to load and unload goods quickly from containers or trucks. It can be installed in the foundation pit, and the platform is flat with the ground level when finish work. A safety guard rail is optional.
Here are the 9 kinds of Serco Loading Dock Lifts for your warehouse or industrial dock system requirement in Miami, Florida
1. Serco Level Lift Model
3. Serco Load Warrior Air Lift Model
4. Serco Load Warrior Turntable Model
5. Serco Scissors Dock Lift Model SDL68-5
6. Serco Load Warrior Double Scissors Table Model
7. Serco Load Warrior Tilter Model
8. Serco Load Warrior Scissor Table Model
9. Serco Load Warrior Air Filter
1. Serco Level Lift Model
Scissors lift versatility — Unlike standard scissor lifts, the hydraulically powered dock lip ensures faster cycling times and its lifting capacity can handle the toughest loads while also providing dock-to-grade-level forklift access
Design Highlights
o 50,000 lbs. Capacity Leveler (per ANSI MH14.1-1987)
o 12,000 lbs. Capacity Lift (8 ft. long units)
o 20,000 lbs. Capacity Lift (10 & 12 ft. long units)
o 18″ Lip Standard
o LED Light Communication Package
o Remote 7.5 HP Independent Lift Motor & Hydraulic System
o PLC Operation
o 1 HP Independent Leveler Motor & Hydraulic System
o Full Feature NEMA 12 Control Panel with Mushroom Style Stop Button
o Remote NEMA 4X Pendant Push Button Hand Control
o Interior Warning Light & Audible Alarm Indicate Dock Lift Is Not In Stored Position
o Safety Velocity Fuse on Leveler and Lift
o Guard Rail Package
o Rear Hinge Blocks
o Protective Roller Curtain on Front
o Side and Rear Weatherseal
o Grease Fittings
2. Serco Rail Lift Model
Design Highlights
o Low Profile for Surface-mounted Applications z No Pit Construction Required
o Three-sided Platform
o Heavy-duty I-beam Deck Understructure
o Excellent End-load Stability in Fully Raised Position z Displacement style Cylinder with Internal Stops
o Self-contained Power Unit/Control Panel
o Standard Pre-wired Control Panel
o NEMA 4X Push-button Controller with 15’ Cord
o Superior Speed-to-horsepower Ratio Compared to Scissor-style Dock Lifts
o Direct thrust Cylinders Provide Constant Speed Through Full Range of Travel
o Checker Plate or Smooth Deck Surface z Sealed Guide Bearing Rollers
o Fused 24-volt Control Circuit
3.Serco Loadwarrior Air Lift Model
Design Highlights
o No lag down, portable design
o Pallet jack pockets built-in
o Removable gibs
o Over-pressure relief valve
o Operating angle from horizontal to 30 degrees from horizontal
o Heavy-duty airbag
o Down speed flow control
o Works on “shop air,” 80psi
o Includes a hand or foot valve control and a 6′ hose
o Meets or exceeds the ANSI MH29.2 standard for industrial scissor lift
4. Serco Loadwarrior Turntable Model
Manual or powered models are available to efficiently palletize, build-up and break-down, and either can be mounted on a scissor lift, stable bench, or other surfaces. Besides, ground-mounting is also available.
Design Highlights
o Rigid base frame with predrilled mounting holes
o 1/2″ thick steel platform with rounded corners
o Tough TGP hard-chromed kingpin
o Rollers are sealed ball bearings for ease of operation
o Roller-pin bushings are self-lubricating
o 34″ x 34″ is minimum turntable size
5.Serco Scissors Dock Lift Model SDL68-5
Our Dock Lifts can accommodate a wide variety of truck styles; from 20″ step vans or pick-up trucks to high cube vans, standard semi-vehicles and 60″ high stake bed vehicles. They can be pit or surface-mounted inside the building or in front of the loading dock. (Surface-mounted dock lifts can be relocated if used in applications where a pit or permanent installation is prohibited.)
Design Highlights
o Beveled toe guards
o 18″ standard solid or split bridge plate
o Dual hydraulic lifting cylinders for optimum performance
o Velocity fuses on lift cylinders prevent uncontrolled descent
o Removable, mandrel-formed tubing handrails
o Maintenance safety strut
o Safety tread steel deck
o Safety chains across operating ends
o Upper travel limit switch
o Available in 4,000-20,000 lb. capacities
6. Serco Loadwarrior Double Scissors Table Model
Design Highlights
o Pre-wired power unit with UL approved control components
o Internally mounted 5 hp power unit
o Self-lubricating composite bearings
o Solid steel legs with stiffener bars
o Turned, ground, polished and hard-chromed axle pins
o Double-wire braided hydraulic hoses
o Velocity fuses on all cylinders to prevent uncontrolled descent
o Polyethylene reservoir allows an easy visual check of oil level
o Maintenance locks built into the base frame
o Meets or exceeds ANSI MH29.1 standard for industrial scissor lifts
7.Serco Loadwarrior Tilter Model
Design Highlights
o Pre-wired power unit with UL approved control components
o Power unit internally mounted
o Available in 1 1/2 hp three-phase or 3/4 hp single-phase with 24V AC control valve
o Self-lubricating composite bearings
o Velocity fuses on all cylinders to prevent uncontrolled descent
o Double wire braided hydraulic hoses
o Polyethylene reservoir allows an easy visual check of oil level
o Maintenance locks built into the frame
o Standard 12′ high lip
o 28″ W x 38″ L minimum platform size
o Meets or exceeds the ANSI MH29.2 standard for industrial tilters
8. Serco Loadwarrior Scissor Table Model
Design Highlights
o Solid steel legs with stiffener bars for extra strength and support
o Polyethylene tank prevents condensation, provides an easy check of oil level
o High-pressure cylinders with safety velocity fuse to prevent uncontrolled descent
o Pre-wired NEMA-rated controls
o High-strength roller pins with snap rings
o Hardened steel rollers
o High-strength steel polished axle pins
o UL-approved control components
o Meets or exceeds ANSI MH29.1 standard for industrial scissor lifts
9.Serco Loadwarrior Air Tilter
Design Highlights
o Reinforced, heavy-duty airbag
o Air damper reduces platform bounce
o Fork pockets for simple
As an expert in loading dock solutions in Miami, Florida, Overhead Door Company of South Florida, a Division of DuraServ can provide a loading dock lift system or solution for your warehouse. Also, we will build a custom loading dock lift system to your custom specifications, ensuring you’re provided with effective loading dock lifts that are both functional and safe.
Buy a Loading Dock Lifter today!
To obtain a tailored quote for our loading dock equipment in South Florida, get in touch with our friendly sales team today. We’re all too happy to provide helpful advice and assistance that takes your needs into account. Simply give us a call at (954) 266-7960 or complete our convenient online contact form to receive a prompt reply.
Other articles and publications:
Choose a loading dock company that blends safety, efficiency, and expertise together for your loading dock needs.
All loading dock should have the most efficient loading dock system in place but it would be hard to uphold and sustain in the absence of an advisor with the utmost expertise on the dock system.
6/17/2020
Overhead Door Company of South Florida gained its area of expertise through the years and with the integration of the well-trained technicians, your loading dock leveler concerns in South Florida.
8/27/2019
Call OHD of South Florida at (954) 266-7960 for Serco truck restraints and wheel restraints for loading dock systems in Miami, FL installation and services
5/17/2021
The Serco Hydraulic Dock Leveler Model HLQ makes hydraulic operation simple with a variety of features to create a safe and efficient working environment for your loading dock operations.
1/22/2020
The use of an air powered loading dock leveler is advantageous because it provides an efficient quality on top of its higher degree of safety features.
3/18/2020
Articles and publications of other companies:
American Roll Up Door Co serves an important role in critical times like this pandemic by providing an efficient loading dock system and sustains supply chain movement in Jacksonville, Florida.
5/13/2020
It is normal to feel anxious if your loading dock system does not function efficiently and effectively. To date, you need not worry about that burden because everything will now be addressed promptly.
5/14/2020
Mechanical dock levelers are the most economical and easy to operate auxiliary equipment of your loading dock system to load and unload your goods.
9/17/2019
Air-Powered Dock Leveler offers loading dock operation with maximum efficiency. American Roll-Up Door Co distributes loading dock levelers and provides quality installation of the dock system.
10/16/2020
For loading dock and commercial doors design, installation, repair, and maintenance in Orlando, FL, call American Roll-Up Door Co. team today!
4/20/2021
Efficient ways to keep your loading dock equipment comfortable and running smoothly around the loading dock area. Southern Dock Products will help you find the best energy saving solutions.
6/17/2020
Business details
- +1 (954) 266-7960
- 3949 Commerce Pkwy, Miramar, FL 33025
- www.ohdsouthflorida.com/
Overhead Door of South Florida distributes, installs and service Miami Serco Loading Dock System, levelers and lifts, Overhead rolling steel doors and sectional doors.
Florida
company, product and service directory
company, product and service directory
Business Network 2008-2024
All rights reserved
All rights reserved